Live Booting Linux from CD-ROM, DVD-ROM and USB Flash

Step 1
Download or copy from someone who has, the Linux OS image (always in .iso format)
Step 2
If you do not have a software that can burn CD or DVD image, then download active@ ISO Burner, it is free. (Most CD burning utilities can burn images, I know of Nero and Roxio)
To make USB flash images, dowload liveusb-creator-3.7 free utility.
Step 3
Install these softwares and run them. The liveusb-creator-3.7 does not need installation, just extract the zip file and run the application

From Drop Box

Step 4
Insert the empty CDor DVD into your drive and set the parameters on the active ISO burner to that shown below

But if your CD or DVD drive is not very strong, set the Speed to 10x for CD and 4x for DVD. In fact, those settings are recommended even if your drive is new. This prevents error in the data burned since you will end up burning till the edge of the CD or DVD considering the size of the images which nearly equals the total capacity of the CD or DVD.
Then browse to the directory of the Linux OS image file and select it in the source box below.

From Drop Box

For the USB flash image,

click the browse button and select the image file. Indicate the Target Device and create live USB.
Step 5
Reboot your computer and set the boot sequence to use DVD/CD drive and USB drive before Hard Disk.
Voila! Your computer will boot into the Linux OS, just make sure you do not install the Linux yet, and choose 'Boot without installing' or 'Run without any changes to your computer'. Now you can tryout the Linux OS without installing it on your hard disk.